OMAX Water Recycling System

The OMAX Water Recycling System is designed to capture the workable overflow water for recycling to the proper specifications

The OMAX Water Recycling System is designed to capture the workable overflow water for recycling to the proper specifications, then returning the water back to the high pressure pump. A filtration system traps suspended particles and ensures that high quality water feeds to the high pressure pump. An ozone generator is used to reduce bacteria growth.

Benefits & Features

  • Closes the exit drain completely and allows you to reuse the water
  • If maintained properly, the Water Recycling System meets the OEM desired water quality sent to the high pressure pump
  • Recycles and conditions make-up water to OEM specifications
  • Assists in complying to local or state waste authority disposal regulations
  • Provides a configurable system so minimal solids are present in the recycled water
  • Recycles all water used in the cutting and cooling process
  • Laminar weir prefilter system
  • Bag/cartridge filters for suspended solids
  • Resin for TDS/dissolved solids filtering
  • Ozone generator for bacteria control
  • Separate chiller for heat dissipation
  • One micron absolute final filter
  • Filter, deionization resin, and low water alarms

REQUIREMENTS

  • Inlet water temperature at or below 70° F (21° C)
  • Inlet water pressure above 30 psi (2.1 bar)

RELATED ARTICLES

Is Your Water Smelling … Pungent?
When you don’t use your abrasive waterjet for an extended period of time, you may notice that the stagnant water may start to produce an odor. What do you do about it? We’ll discuss this in a minute, but first let us note that OMAX does not recommend putting any chemicals into your tank.
Reasons to Use a Water Recycling System with Your Abrasive Waterjet
The facility where the machine is installed has no drain.The machine is installed at a location where the drain is not accessible.The facility is in a drought or water-rationing region. The OMAX Water Recycling System can reduce water consumption by up to 95%.The makeup water supply is of poor quality. The Water Recycling System conditions the makeup water to OEM specifications.The incoming water...
What Can You Do With Used Abrasive
With subtractive machining processes, the discussion eventually turns towards what to do with the collected leftover bits. While CNC mills have to worry about material chips and oils, abrasive waterjet users have to deal with spent abrasive. With abrasive feed rates capable of exceeding 2lbs a minute, that spent abrasive can accumulate at a very rapid rate. What to do with that used abrasive...
We use cookies to provide a better browsing experience on our site, to analyze traffic to the site, to personalize content and to serve targeted ads. By pressing the confirmation button or by continuing to browse our site, you agree that our site will store cookies in your browser.