The pinnacle in high performance precision abrasive waterjet cutting machining.
Cutting envelope of 4064 mm x 2032 mm with ±0.025 mm cutting tolerance
|FOOTPRINT (WITH PUMP & CONTROLLER)||7671 mm x 3937 mm|
|HEIGHT (WITH SCISSOR PLUMBING)||4090 mm|
|OPERATING WEIGHT||22,487 kg|
|WEIGHT (TANK EMPTY)||4,151 kg|
|X-Y CUTTING TRAVEL*||4,064 mm x 2,032 mm|
|Z-AXIS TRAVEL (WITH MOTORIZED Z AXIS)*||305" mm|
|TABLE SIZE||6,578 mm x 3,924 mm|
* Accessories may reduce travel. Accuracy specifications are at 72° F (22° C).
|MATERIAL SUPPORTS SLATS||4" x 1/8" Galvanized Steel|
|MAXIMUM SUPPORTED MATERIAL LOAD||1,950 kg/sq meter|
|ELECTRICAL REQUIREMENTS||3-Phase, 380-480 VAC ±10%, 50-60 Hz|
|NOISE LEVEL||Below 80 dBA at one meter for submerged cutting|
|LINEAR POSITIONAL ACCURACY*||±0.025 mm|
|BALLBAR CIRCULARITY*||±0.0635 mm|
Maximized uptime with 1,000 hours between maintenance cycles
Increased production by delivering 30% more cutting power
Variable Frequency Drive reduces startup power consumption and maximizes operating flexibility
|ENDUROMAX 50 HP||ENDUROMAX 40 HP||ENDUROMAX 30 HP|
|MOTOR POWER||50 HP (37kW)||40 HP (30kW)||30 HP (22 kW)|
|MAX JET POWER||42.5 HP (31.5 kW)||34.0 HP (34 kW)||25.5 HP (18.7 kW)|
|OUTPUT PRESSURE||60,000 psi||60,000 psi||60,000 psi|
|ORIFICE & FLOW RATE||0.41 mm / 4.54 lpm||0.36 mm / 3.48 lpm||0.30 mm / 2.54 lpm|
|FOOTPRINT LXWXH||1,676mm x 914mm x 978mm||1,676mm x 914mm x 978mm||1,676mm x 914mm x 978mm|
Additional pump configurations available.
** Recommended maximum orifice size. Smaller orifice sizes have a corresponding lower flow rate.
Backed by our exclusive IntelliMAX Premium Software
Exclusive IntelliTRAX abrasive jet linear drive system provides 350 in/min (8.9 m/min) traverse with real-time closed-loop positioning feedback
12-inch (305 mm) programmable Z axis travel with lowest ceiling height requirement design in the industry.
Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
Standard scissor-style hard plumbing.
Designed and manufactured at the OMAX factory in Kent, Washington, USA
Does not create heat-affected zones or mechanical stresses
Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
No tool changes & minimal fixturing dramatically reduce setup
Service & Training
Unlimited free training for the life of your machine
Unlimited software upgrades for the life of the machine
2-year / 4000-hour limited warranty
3 days of onsite training upon installation